Before you begin
Have the printer switched on and its cable plugged in.
chronoskin prints through a small file called a driver, one for each make of printer. Drivers for 340 printers are on disk 3.
Steps
- On the File menu, click Printer Setup.
- Click Add, then choose the maker and the model.
- When you are asked for the port, type
LPT1unless your printer's booklet says otherwise. - Click Print Test Page.
Note: if your model is not in the list, choose the nearest lower number from the same maker.
Warning: do not unplug the cable while the test page prints. The printer may need to be switched off and on again.